NISSAN 2015 Quest - Navigation System Owner's Manual - Manual (Page 14)

2-6 Getting started
*
6 <SOURCE> :
Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.
*
7 < >:
Push to change what is shown on the
vehicle information display.
Refer to the vehicle Owner’s Manual.
The navigation system starts when the ignition
switch is placed in the ACC or ON position.
NOTE:
Do not keep the navigation system on with
the engine or the hybrid system stopped.
Doing so may discharge the vehicle battery
(12V battery). When you use the navigation
system, always keep the engine or the
hybrid system running.
By pushing <STATUS> at anytime, you can
display a split screen with audio information that
is always at the top. Each time <STATUS> is
pushed, the bottom part of the screen changes
between air conditioner, fuel economy or navi-
gation directions.
INFO:
There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.
When a route to the destination is set and the
audio system is on, a screen similar to the one
above appears.
*
1 Turning direction at the next intersection
*
2 Name of the next street
STARTING THE SYSTEM
NAVIGATION SYSTEM STATUS
SCREEN