NISSAN 2015 Quest - Navigation System Owner's Manual - Manual (Page 193)

6. Highlight [Setting] and push <ENTER>.
7. Highlight an item to edit, and push
<ENTER>.
Setting items
. [Edit User Name]:
Edit the user name.
. [Delete Voice Data]:
Reset the user voice that the voice
recognition system has learned.
. [Continuous Learning]:
Have the system learn the voice com-
mands of the user in succession, without
selecting commands one by one.
VOICE COMMAND EXAMPLES
To use the voice recognition function, speaking
one command is sometimes sufficient, but at
other times it is necessary to speak two or more
commands. As examples, some additional basic
operations by voice commands are described
here.
Example 1: Switching the map to 2D
(Plan View) mode
1. Push <TALK > located on the steering
wheel.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on the
screen changes from [ ] to [ ], speak
“Plan View Map”.
4. Voice feedback will be provided when the
command is accepted, and the map is
displayed in 2D (Plan View).
Example 2: Setting a destination using
places list
1. Push <TALK > located on the steering
wheel switch.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on the
screen changes from [ ] to [ ], speak
“Places”.
Voice recognition 9-23