NISSAN 2015 Quest - Navigation System Owner's Manual - Manual (Page 33)

Type A
Type B
Type C
1. Push <TALK > located on the steering
wheel switch.
2. A list of commands appears on the screen,
and the system provides the voice menu
prompt.
3. After the tone sounds and the icon on the
screen changes from [ ] to [ ], speak a
command.
4. Continue to follow the voice menu prompts
and speak after the tone sounds until
operation is completed.
Operating tips
. Say a command after the tone.
. Commands that are available are always
shown on the display and spoken through
voice menu prompts. Commands other than
those that are displayed are not accepted.
Please follow the prompts given by the
system.
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push <BACK> once to return to the
previous screen.
. To cancel the command, push and hold
<TALK >. The message, “Voice recogni-
tion is canceled” will be announced.
Voice Prompt Interrupt:
Push <TALK > to stop the voice prompt and
give the command at once. Remember to wait
for the tone before speaking.
Getting started 2-25