NISSAN 2012 Altima Sedan - Owner's Manual User Manual

Page 248

Advertising
background image

● Second and third generation iPod touchா

(Firmware version 3.1.2 or later)

● First generation iPod nanoா (Firmware ver-

sion 1.3.1 or later)

● Second generation iPod nanoா (Firmware

version 1.1.3 or later)

● Third generation iPod nanoா (Firmware ver-

sion 1.0.2 or later)

● Fourth generation iPod nanoா (Firmware

version 1.0.4 or later)

● Fifth generation iPod nanoா (Firmware ver-

sion 1.0.1 or later)

The iPod touch

ா may not response quickly with

the system in some cases.

Make sure that the iPod

ா firmware is updated.

Audio main operation:

Place the ignition switch to the ACC or ON
position. Then, press the CD·AUX or iPod

MENU button repeatedly to switch to the iPod

mode.

If the audio system is turned off while the iPod

ா is

playing, the iPod

ா plays when the audio system is

turned back on.

If the audio system is off, pressing the CD·AUX or
iPod

ா MENU button turns the audio system on

and plays the iPod

ா.

If the audio system is on, the audio system auto-
matically begins playing tracks from the iPod

when it is plugged into the jack.

iPod

MENU button:

Press the iPod

ா MENU button while the iPodா is

connected to show the iPod

ா operation menu on

the audio display. Scroll through the menu list
using the TUNE·SCROLL control dial. Press EN-
TER to select a menu item. Items in the iPod

menu appear on the display in the following or-
der:

● Now playing
● Playlists
● Artists
● Albums
● Songs
● Podcasts
● Genres
● Composers
● Audiobooks
● Shuffle songs

For more information about each item, see the
iPod

ா Owner’s Manual.

Next/Previous Track and

Fast Forward/Rewind:

Press the

or

button for 1.5 seconds

while the iPod

ா is playing to reverse or fast for-

ward the track being played. The track plays at an
increased speed while reversing or fast forward-
ing. When the button is released, the iPod

ா re-

turns to the normal play speed.

Press the

or

button for less than 1.5

seconds while the USB device is playing to return
to the beginning of the current track or to play the
next track. Press the button several times to skip
forward or backwards several tracks.

REPEAT (RPT):

When the RPT button is pressed while a track is
being played, the play pattern can be changed as
follows:

Repeat Off

→ 1 Track Repeat → All Repeat →

Repeat Off

1 Track Repeat: the current track will be re-
peated.

All Repeat: all songs in the current list are re-
peated.

Monitor, climate, audio, phone and voice recognition systems

4-81

Advertising
This manual is related to the following products: