Variable voltage control system -18, Drive belt -18 – NISSAN 2012 Altima Sedan - Owner's Manual User Manual

Page 385

Advertising
background image

CAUTION

Do not ground accessories directly to

the battery terminal. Doing so will by-
pass the variable voltage control sys-
tem and the vehicle battery may not
charge completely.

Use electrical accessories with the en-

gine running to avoid discharging the
vehicle battery.

Your vehicle is equipped with a variable voltage
control system. This system measures the
amount of electrical discharge from the battery
and controls voltage generated by the generator.

The current sensor

A

is located near the battery

along the negative battery cable. If you add elec-
trical accessories to your vehicle, be sure to
ground them to a suitable body ground such as
the frame or engine block area.

1.

Power steering fluid pump pulley

2.

Water pump pulley

3.

Generator

4.

Air conditioner

5.

Crankshaft pulley

6.

Drive belt Automatic tensioner

WARNING

Be sure the ignition switch is placed in the
OFF or LOCK position before servicing
drive

belt.

The

engine

could

rotate

unexpectedly.

LDI0694

QR25DE engine

WDI0673

VARIABLE VOLTAGE CONTROL
SYSTEM

DRIVE BELT

8-18

Maintenance and do-it-yourself

Advertising
This manual is related to the following products: