Guidance screen settings -10 – NISSAN 2012 Altima Sedan - Navigation System Owner's Manual User Manual

Page 118

Advertising
background image

Junction guidance

While driving on a freeway, when the vehicle is
approximately 1 mile (approximately 2 km) from a
junction, the system automatically switches to
the split screen and displays an enlarged view of
the junction (3D) in the left screen. After passing
the junction, the system automatically returns to
the full screen mode. To switch to the full screen
mode while the enlarged junction view is
displayed, press MAP.

Turn list

Depending on the setting, the system can con-
stantly display the split screen and show the turn
list in the left screen. When approaching a guide
point, the left screen automatically switches to
an enlarged view of the intersection. To switch to
the full screen mode, press MAP. Pressing MAP
again displays the turn list. When approaching a
guide point, the enlarged view of the intersection
is automatically displayed. To display the turn list,
press MAP. To display the map screen, press
MAP again.

GUIDANCE SCREEN SETTINGS

The guidance screen can be displayed at all
times even when the vehicle is located away
from the guide point. The screen to be displayed
can be set.

Split screen settings

The display setting on the left-hand side screen
shown during route guidance can be changed.

NRG0011

NRG0012

NRG0016

5-10

Route guidance

Advertising
This manual is related to the following products: