Nissan voice recognition -2, Manual control -2, Standard mode -2 – NISSAN 2012 Altima Sedan - Navigation System Owner's Manual User Manual

Page 236: Confirming how to use voice commands -2

Advertising
background image

NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, in one of two
modes, Standard Mode or Alternate Command
Mode. Standard Mode allows the operation of
Navigation, Phone, Audio, Information and Help.

The commands that are available are always
shown on the display and announced by the
system. To perform operations, simply follow the
prompts given by the system. In Standard Mode,
hands-free operation of Change map view,
Route selection and Bluetooth Audio, etc. is not
available through Voice Recognition.

Alternate Command Mode allows advanced
operations. When this mode is active, an ex-
panded list of commands can be spoken after

pressing

, and the voice command menu

prompts are turned off. Note that in this mode
the recognition success rate may be affected
because the number of available commands and
ways of speaking each command are increased.
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Standard
Mode

be

used

for

the

best

recognition

performance.

“ALTERNATE COMMAND MODE”
(page 9-16)

INFO:

● To improve recognition success when Alter-

nate Command Mode is active, try using the
Speaker Adaptation function available in that
mode.

“SPEAKER ADAPTATION”
(page 9-28)

Otherwise, it is recommended that Alter-
nate Command Mode be turned OFF and
Standard Mode be used for the best recog-
nition performance.

● For the voice commands for the audio, phone

and other systems, refer to the vehicle Own-
er’s Manual. The following sections refer only
to the navigation, phone and information
systems.

MANUAL CONTROL

While using the voice recognition system for
certain Phone and Navigation features, you can
switch to using manual controls (touch screen,
steering wheel controls) and the information you
have already entered by voice control will be
retained. To switch to manual controls, touch the
“Manual Controls” key on the display when it
appears. The system will respond by speaking
“Changing to manual operation. Please use
manual controls to continue.”

CONFIRMING HOW TO USE VOICE
COMMANDS

When operating the voice recognition system for
the first time or if help is preferred to use the
system, the User Guide can be displayed.

It is possible to confirm how to use voice com-
mands by accessing a simplified User Guide,
which contains basic instructions and tutorials
for several voice commands.

NISSAN VOICE RECOGNITION

STANDARD MODE

9-2

Voice recognition

Advertising
This manual is related to the following products: