NISSAN 2014 Altima Sedan - Owner's Manual - Manual (Page 100)

Tire Pressures (if so equipped)
The unit for tire pressure that displays in the
vehicle information display can be changed to:
● psi
● kPa
● bar
● Kgf/cm
2
Use the and the ENTER buttons to select
and change the unit.
Temperature
The temperature that displays in the vehicle infor-
mation display can be changed from:
● °F (Fahrenheit)
● °C (Celsius)
Use the ENTER button to toggle choices.
Welcome Effects
The welcome screen display can be turned
ON/OFF to display when the ignition switch is
placed in the ACC or ON position. To
enable/disable the welcome screen:
1. Press the button.
2. Use the buttons to select “Settings”,
and press ENTER.
3. Select “Welcome Effects” using the
buttons and press ENTER to turn this func-
tion ON or OFF.
Factory Reset
The settings in the vehicle information display can
be reset back to the factory default. To reset the
vehicle information display:
1. Press the button.
2. Use the buttons to select “Settings”,
and press the ENTER button.
3. Select “Factory Reset” using the but-
tons and press the ENTER button.
4. Select “YES” to return all settings back to
default by pressing the ENTER button.
Instruments and controls 2-23