Bluetooth® settings -105 – NISSAN 2014 Altima Sedan - Owner's Manual User Manual

Page 274

Advertising
background image

The text message, sender and delivery time are
shown on the screen. Use the tuning switch on
the steering wheel to scroll through all text mes-
sages if more than one are available. Press
the

button to exit the text message screen.

Press the

button to access the following

options for replying to the text message:

● Call Back

Speak this command to call the sender of
the text message using the Bluetooth®
Hands-Free Phone System.

● Send Text

Speak this command to send a text message
response to the sender of the text message.

● Read Text

Speak this command to read the text mes-
sage again.

● Previous Text

Speak this command to move to the previ-
ous text message (if available).

● Next Text

Speak this command to move to the next text
message (if available).

NOTE:

Text messages are only displayed if the
vehicle speed is less than 5 mph (8 km/h).

BLUETOOTH® SETTINGS

To access and adjust the settings for the
Bluetooth® Hands-Free Phone System:

1. Press the SETTING button.

2. Use the TUNE/SCROLL knob to select

“Bluetooth” and then press the ENTER but-
ton:

● Bluetooth

Select “On” or “Off” to turn the vehicle’s
Bluetooth® system on or off.

● Add Phone or Device

To connect a phone to the system, see
“Connecting procedure” in this section.

● Delete Phone or Device

Select to delete a phone from the displayed
list. The system will ask to confirm before
deleting the phone.

● Replace Phone

Select to replace a phone from the displayed
list. When a selection is made, the system
will ask to confirm before proceeding. The
recorded phonebook for the phone being
deleted will be saved as long as the new
phone’s phonebook is the same as the old
phone’s phonebook.

● Select Phone or Device

Select to connect to a previously connected
phone from the displayed list.

● Phonebook Download

Select to turn on or off the automatic down-
load of a connected phone’s phonebook.

● Show Incoming Calls

Select “Driver Only” to have incoming call
information displayed only in the vehicle in-
formation display. Select “Both” to have in-
coming call information displayed in both the
vehicle information display and the center
display screen.

● Text Message

Select to turn on or off the vehicle’s text
messaging feature.

LHA2274

Monitor, climate, audio, phone and voice recognition systems

4-105

Advertising