Connecting procedure -100, Connecting procedure – NISSAN 2014 Altima Sedan - Owner's Manual User Manual
Page 269
CONNECTING PROCEDURE
NOTE:
The connecting procedure must be per-
formed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
To connect a phone to the Bluetooth® Hands-
Free Phone System:
1. Press the SETTING button.
2. Use the TUNE/FOLDER knob to select
“Bluetooth” and then press the ENTER
button.
Menu Item
Result
Bluetooth ON/OFF
Allows user to switch Bluetooth on and off. Bluetooth must be turned on in order to connect device.
On
Turns Bluetooth functionality on
Off
Turns Bluetooth functionality off
Add Phone or Device
Upon pressing this button, a message with a PIN appears on the screen. operate the Bluetooth phone to enter the PIN and complete the con-
nection process.
Replace Phone
Replace the phone currently connected to the system. This option allows the user to keep any voicetags that were recorded using the previ-
ous phone if vehicle is equipped with voice recognition.
The connecting procedure varies according to each phone. See the phone’s Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth
or call the NISSAN Consumer Affairs Department for instructions on connecting recommended cellular phones.
LHA2775
4-100
Monitor, climate, audio, phone and voice recognition systems