How to adjust the screen -4 operating tips -4 – NISSAN 2010 Cube - Owner's Manual User Manual

Page 146

Advertising
background image

Black plate (150,1)

Model "Z12-D" EDITED: 2009/ 9/ 17

any object on the hill is viewed in the monitor
further than it appears.

SAA2778

Backing up on a steep downhill

When backing up the vehicle down a hill, the
distance guide lines and the vehicle width guide
lines are shown further than the actual distance.
For example, the display shows 3 ft (1.0 m) to
the place

*

A

, but the actual 3 ft (1.0 m)

distance on the hill is the place

*

B

. Note that

any object on the hill is viewed in the monitor
closer than it appears.

HOW TO ADJUST THE SCREEN

To adjust the Brightness and Contrast of the
RearView Monitor, push the SETTING button
until the desired mode is displayed with the
RearView Monitor on, and turn the TUNE control
dial to adjust the brightness and contrast of the
screen to the preferred level.

OPERATING TIPS

. When the selector lever is shifted to the R

(Reverse) position, the monitor screen auto-
matically changes to the RearView Monitor
mode. However, the radio can be heard.

. It may take some time until the RearView

Monitor or the normal screen is displayed
after the selector lever has been shifted to R
from another position or to another position
from R. Objects may be distorted momenta-
rily until the RearView Monitor screen is
displayed completely.

. When the temperature is extremely high or

low, the screen may not clearly display
objects. This is not a malfunction.

. When strong light directly enters the cam-

era, objects may not be displayed clearly.
This is not a malfunction.

4-4

Heater, air conditioner, audio and phone systems

Advertising