NISSAN 2010 Cube - Owner's Manual - Manual (Page 151)

Black plate (155,1)
Model "Z12-D" EDITED: 2009/ 9/ 17
Dehumidified heating:
This mode is used to heat and dehumidify the
air.
1. Push the air recirculation button to
switch to the outside air circulation mode.
(The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial to the
desired position.
4. Push the A/C button on. (The A/C indicator
light will illuminate.)
5. Turn the temperature control dial to the
desired position between the middle and the
hot (right) position.
Dehumidified defogging:
This mode is used to defog the windows and
dehumidify the air.
1. Turn the air flow control dial to the
position.
2. Turn the fan speed control dial to the
desired position.
3. Turn the temperature control dial to the
desired position.
When the position is selected, the air
conditioner will automatically turn on. This will
dehumidify the air and help to defog the
windows. The A/C indicator light will illuminate
when the air conditioner automatically turns on.
The air conditioner and A/C indicator light will
remain on in all flow control modes until the A/C
button is pressed or the fan control dial is turned
to off.
Heater, air conditioner, audio and phone systems 4-9