Caution – NISSAN 2010 Cube - Owner's Manual User Manual

Page 56

Advertising
background image

Black plate (54,1)

Model "Z12-D" EDITED: 2009/ 9/ 17

seat. Items such as these may move
during normal driving or a collision
and result in serious injury or death.
Booster seats are designed to be
used with a lap/shoulder belt. Boos-
ter seats are designed to properly
route the lap and shoulder portions
of the seat belt over the strongest
portions of a child’s body to provide
the maximum protection during a
collision.

. Follow all of the booster seat man-

ufacturer’s instructions for installa-
tion and use. When purchasing a
booster seat, be sure to select one
which will fit your child and vehicle.
It may not be possible to properly
install some types of booster seats
in your vehicle.

. If the booster seat and seat belt is

not used properly, the risk of a child
being injured in a collision or a
sudden stop greatly increases.

. Adjustable seatbacks should be

positioned to fit the booster seat,
but as upright as possible.

. After placing the child in the booster

seat and fastening the seat belt,

make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the abdomen.

. Do not put the shoulder belt behind

the child or under the child’s arm. If
you must install a booster seat in
the front seat, see “BOOSTER SEAT
INSTALLATION ON FRONT PASSEN-
GER SEAT AND REAR SEAT” later in
this section.

. When your booster seat is not in

use, keep it secured with a seat belt
to prevent it from being thrown
around in case of a sudden stop or
accident.

CAUTION

Remember that a booster seat left in a
closed vehicle can become very hot.
Check the seating surface and buckles
before placing your child in the booster
seat.

LRS0455

Booster seats of various sizes are offered by
several manufacturers. When selecting any
booster seat, keep the following points in mind:

. Choose only a booster seat with a label

certifying that it complies with Federal Motor
Vehicle Safety Standard 213 or Canadian
Motor Vehicle Safety Standard 213.

. Check the booster seat in your vehicle to be

sure it is compatible with the vehicle’s seat
and seat belt system.

1-40

Safety — Seats, seat belts and supplemental restraint system

Advertising