Map lights -38 map light control switch -38 – NISSAN 2013 Cube - Owner's Manual User Manual

Page 112

Advertising
background image

Black plate (110,1)

[ Edit: 2012/ 7/ 19 Model: Z12-D ]

2-38

Instruments and controls

SIC4572

MAP LIGHTS

Operate the map light switch to turn the map
light on or off.

*

1

: ON position

*

2

: OFF position

SIC4573

MAP LIGHT CONTROL SWITCH

The map lights control switch has three posi-
tions: ON

*

1

, OFF

*

2

and center.

ON position

When the switch is in the ON position

*

1

, the

map lights will illuminate.

OFF position

When the switch is in the OFF position

*

2

, the

map lights will not illuminate, regardless of the
condition.

Center position

When the switch is in the center position, the
map lights will illuminate under the following
conditions:

.

ignition switch is placed in the OFF position
(models with Intelligent Key system)
— remain on for about 15 seconds.

.

the key is removed from the ignition switch
(models without Intelligent Key system)
— remain on for about 15 seconds.

.

doors are unlocked by pushing the UN-
LOCK

button (on the keyfob or

Intelligent Key) or the request switch (In-
telligent Key system equipped model), with
the ignition switch in the LOCK position
— remain on for about 15 seconds.

.

any door is opened and then closed with the
ignition switch in the LOCK position
— remain on for about 15 seconds.

.

any door is opened with the ignition switch
in the ACC or ON position
— remain on while the door is opened.

When the door is closed, the lights go
off.

The lights will turn off after a period of
time when the lights remain illuminated to
prevent the battery from becoming dis-
charged.

Condition:

Advertising