Warning – NISSAN 2013 Cube - Owner's Manual User Manual
Page 36
![background image](/manuals/602661/36/background.png)
Black plate (34,1)
[ Edit: 2012/ 7/ 19 Model: Z12-D ]
1-18
Safety — Seats, seat belts and supplemental restraint system
SSS0965
Stowing rear center seat belt:
When folding down the rear seat, the rear center
seat belt can be retracted into a stowed position
as follows:
1. Hold the connector tongue
*
1
so that the
seat belt does not retract suddenly when the
tongue is released from the connector
buckle. Release the connector tongue
*
1
by inserting a suitable tool such as key
*
2
into the connector buckle.
2. Retract the seat belt and secure the seat
belt tongue and connector tongue on the
seat belt hook
*
3
.
WARNING
.
Do not unfasten the rear center seat
belt connector except when folding
down the rear seat.
.
When returning the seatback, be
sure to attach the rear center seat
belt connector.
SSS0966
Attaching rear center seat belt:
Always be sure the rear center seat belt
connector tongue and connector buckle are
attached. Disconnect only when folding down
the rear seat.
Condition: