NISSAN 2011 LEAF - Navigation System Owner's Manual - Manual (Page 187)

Black plate (181,1)
EV_0ENJ-N EDITED: 2011/ 2/ 16
MAKING A CALL
To make a call, follow this procedure.
1. Push the button on the steering wheel.
2. Touch a method for making a call.
Available methods
. [Vehicle Phonebook]:
Select a telephone number from the
phonebook, and then make a call. Before
making a call, the telephone number must
be registered in the phonebook.
. [Call History]:
Select a telephone number from the
incoming or outgoing history lists, and
then make a call.
. [Handset Phonebook]:
Download the phonebook from a cellular
phone that is connected to the vehicle,
select a telephone number from the
phonebook, and then make a call. Phone-
book data should be registered in the
system after downloading the phonebook
from the cellular phone that is connected
to the vehicle. If the phonebook is not
registered, a message that reminds you
of phonebook data download will be
displayed.
. [Dial Number]:
Input the phone number manually using
the keypad displayed on the screen.
“How to input letters and numbers”
(page 1-7)
3. Dialing will start and the screen will change
to the call in progress screen.
4. After the call is over, perform one of the
following actions to finish the call.
. Push the button on the steering
wheel.
. Touch [Hang up].
RECEIVING A CALL
When you hear a phone ring, the display will
change to the incoming call mode. To receive a
call, perform one of the following procedures
listed below.
. Push the
button on the steering wheel.
. Touch [Answer].
There are some options available when receiving
a call. Select one of the following displayed on
the screen.
. [Answer]:
Accept an incoming call to talk.
. [Hold Call]:
Put an incoming call on hold.
. [Reject Call]:
Reject an incoming call.
To finish the call, perform one of the following
procedures listed below.
Bluetooth
®
Hands-Free Phone System 7-5