NISSAN 2011 LEAF - Navigation System Owner's Manual - Manual (Page 91)

Black plate (85,1)
EV_0ENJ-N EDITED: 2011/ 2/ 16
Changing route condition
1. Touch [More Routes].
2. Touch the preferred route condition. When
the route is selected, a preview is displayed
on the right side of the screen. After
selecting the route condition, touch [OK].
Available route conditions
. [Short. Time] (purple):
Prioritizes the shortest time.
. [Min. Freeway] (orange):
Minimizes the use of freeways.
. [Short. Dist.] (green):
Prioritizes the shortest distance.
INFO:
. The 3 routes may not always be different.
. When using waypoints, [More Routes] is
disabled. After route guidance is started,
change the route between each waypoint.
“Editing route” (page 3-44)
Confirming route
1. Touch [Route Info].
2. Touch the preferred information item.
Available information
. [Turn List]:
Displays the details of the suggested route.
“Using turn list” (page 3-49)
. [Store Route]:
Stores a calculated route. A maximum of 5
routes can be stored. Stored routes can be
easily retrieved and set as the suggested
route. If no waypoints are set on the route,
the route cannot be stored.
“Storing route” (page 3-57)
. [Map Scroll]:
Displays a map screen where the location of
the destination can be confirmed.
INFO:
The stored route includes only locations (desti-
nation and waypoints) and route calculation
conditions, not the route itself. Therefore, when
the destination is set using a stored route, a
different route may be suggested if the current
vehicle location is different from the one when
the route was stored.
Adding destination or waypoint
Before starting route guidance, destinations
and/or waypoints can be added. A total of 6
destinations or waypoints can be set.
1. Touch [Add Way Pt.].
Navigation 3-37