NISSAN 2011 LEAF - Navigation System Owner's Manual - Manual (Page 210)

Black plate (204,1)
EV_0ENJ-N EDITED: 2011/ 2/ 16
9-6 Monitor system (if so equipped)
5. When the vehicle is parked in the space
completely, push the "P" (Park) button and
apply the parking brake.
Operating tips
. When the selector lever is shifted to the "R"
(Reverse) position, the monitor screen auto-
matically changes to the RearView Monitor
mode.
. It may take some time until the RearView
Monitor is displayed after the selector lever
has been shifted to "R" from another
position or to another position from "R".
Objects may be distorted momentarily until
the RearView Monitor screen is displayed
completely.
. When the temperature is extremely high or
low, the screen may not clearly display
objects. This is not a malfunction.
. When strong light directly enters the cam-
era, objects may not be displayed clearly.
This is not a malfunction.
. Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper. This is not a malfunction.
. The screen may flicker under fluorescent
light. This is not a malfunction.
. The colors of objects on the RearView
Monitor may differ somewhat from those of
the actual object.
. Objects on the monitor may not be clear in a
dark place or at night. This is not a
malfunction.
. If dirt, rain or snow attaches to the camera,
the RearView Monitor may not clearly dis-
play objects. Clean the camera.
. Do not use alcohol, benzine or thinner to
clean the camera. This will cause discolora-
tion. To clean the camera, wipe with a cloth
dampened with diluted mild cleaning agent
and then wipe with a dry cloth.
. Do not damage the camera as the monitor
screen may be adversely affected.
. Do not use wax on the camera window.
Wipe off any wax with a clean cloth
dampened with mild detergent diluted with
water.
CAMERA SETTINGS
Display of predicted course lines can be set to
ON or OFF.
If the rearview monitor is not in operation, set
according to the following procedure.
1. Push the MENU button and touch [Set-
tings].
2. Touch [Others].
3. Touch [Camera].
4. Touch [Predictive Course Lines]. The indi-
cator illuminates when the item is set.
If the rearview monitor is in operation, set
according to the following procedure.
1. Push the MENU button
2. Touch [Predictive Course Lines]. The indi-
cator illuminates when the item is set.