NISSAN 2011 LEAF - Dismantling Guide - Manual (Page 16)

3-3 High Voltage System Shut-Down Procedure
Any of the following procedures can shut down the high voltage system. The dismantling operation can only
begin after shutting down the high voltage system. If the vehicle is heavily damaged, for example the Li-ion
battery is deformed, broken or cracked, appropriate PPE must be used and the Li-ion battery and high
voltage components must not be touched.
• Failure to properly shut down the high voltage system before the dismantling
procedures are performed will result in serious injury or death from electrical shock.
To prevent serious injury or death, DO NOT touch high voltage harnesses or
components without wearing appropriate PPE.
• When contact with high voltage components or high voltage harnesses is
unavoidable, or when there is risk of such contact, you must wear appropriate PPE.
16