NISSAN 2011 LEAF - Dismantling Guide - Manual (Page 22)

3-3.6 Alternate Procedure 2
• Do not remove the service plug without wearing appropriate PPE to help protect
the dismantler from serious injury or death by electrical shock.
• Immediately cover the service plug socket with insulated tape. The Li-ion battery
retains high voltage power even when the service plug is removed. To avoid electric
shock, DO NOT touch the terminals inside the socket.
To avoid unintended installation and risk of electrical shock and severe personal injury
or death, the dismantler should carry the service plug on his/her person while work is in
progress.
1. Locate the carpet flap (1) behind the center console on
the floor raised area. At the notched area (A) pull up on
the carpet flap (1).
NOTE:
Arrow in illustration depicts vehicle front
direction.
2. Remove the 10mm access cover bolts (A) and remove
the cover (1).
NOTE:
Arrow in illustration depicts vehicle front
direction.
3. Remove the service plug by pressing the locking tab (1) and rotating the handle (2) upward.
Using the handle, pull the service plug completely out of its socket.
22