NISSAN 2012 LEAF - Navigation System Owner's Manual - Manual (Page 141)

. [Fade]:
Adjust the sound level between the front and
rear speakers by touching [R] or [F].
. [Speed Sensitive Vol.]:
The sound volume is increased based on the
vehicle speed. Touch [+] or [-] to adjust the
effect level from 0 (OFF) to 3.
FM-AM-SAT RADIO OPERATION
When the FM·AM button or the XM button is
pushed while the power switch is in the "ACC"
or "ON" position, the radio will turn on at the
channel last played.
The last channel played will also turn on when
the
button is pushed to ON. The satellite
radio is not available in Alaska, Hawaii and
Guam.
If another audio source is playing when the
FM·AM button or the XM button is turned to
ON, the audio source will automatically be
turned off and the last radio channel played will
turn on.
When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.
The satellite radio mode requires an active XM
Satellite Radio subscription. The satellite radio is
not available in Alaska, Hawaii and Guam.
It may take some time to receive the activation
signal after subscribing the XM Satellite Radio.
After receiving the activation signal, an available
channel list will be automatically updated in the
radio. For XM, push the power switch from
LOCK to ACC to update the channel list.
Selecting FM/AM/SAT radio band
FM/AM radio band select:
Pushing the FM·AM button will change the
band as follows:
AM
? FM1 ? FM2 ? AM
XM satellite radio band select:
Pushing the XM button will change the band as
follows:
XM1
? XM2 ? XM3 ? XM1
How to view radio screen
FM/AM radio screen:
*
1 Displays the broadcasting station and category
currently being received.
*
2 Displays the frequency currently being received.
*
3 [Info]:
Displays the broadcasting station information
currently being received.
*
4 [SCAN]:
Touch to tune from low to high frequencies and
stop at each broadcasting station for 5 seconds.
*
5 Displays the preset channel list. If 1 of the 6
preset stations listed is touched and held, the
current station will be stored as the new preset.
XM satellite radio screen:
*
1 Indicates the channel, category, program and title
currently being received.
*
2 Indicates the frequency currently being received.
*
3 [CAT]:
Displays a category list for XM radio. When a
category is selected, the channel list will be
displayed.
Audio system 4-11