Timer function – NISSAN 2012 LEAF - Navigation System Owner's Manual User Manual

Page 219

Advertising
background image

Timer function

Symptom

Possible cause

Possible solution

Charging does not start at the time set.

Timer charge has not been set to ON.

Check on the timer charge screen whether the indicator

for [Timer 1] or [Timer 2] is on.

The EVSE (Electric Vehicle Supply Equipment) is not
connected correctly.

Check that the EVSE (Electric Vehicle Supply Equip-
ment) is connected correctly.

The immediate charge switch is in the ON position.

Check the immediate charge switch setting.

The power switch is in the ON position.

Place the power switch in the OFF position when
setting timer charge.

The air conditioner or heater does not operate at the
time set.

The Climete Ctrl. Timer is not set to ON.

On the Climete Ctrl. Timer screen, check whether the
[Timer 1] or [Timer 2] indicator is on.

The EVSE (Electric Vehicle Supply Equipment) is not
connected correctly to the vehicle.

Check whether the EVSE (Electric Vehicle Supply
Equipment) is connected correctly to the vehicle.

Timer charge priority is set and the battery will be
charged while the Li-ion battery available charge gauge
has not reached the full mark.

Check the Climete Ctrl. Timer priority setting.

The power switch is in the ON position.

Place the power switch in the OFF position when
setting timer charge.

The Climate Ctrl. Timer does not operate immediately.

If the departure time set has not yet been reached, or if
the departure time set is after Climate Ctrl. Timer has
operated.

This is not a malfunction.

The timer charge or Climate Ctrl. Timer screen cannot
be displayed.

The power switch is in the "ACC" position.

This screen can be displayed when the power switch is
placed in the "ON" position or when the READY to drive
indicator light is on.

A message prompting me to update the time setting is
displayed.

The system clock has not been set correctly.

Set the time setting correctly.

Days when you do not want the timer function to
operate cannot be set.

All timer functions are set to ON.

Turn off the setting for days where the timer function is
not required.

Troubleshooting guide/General system information

10-7

Advertising