NISSAN 2012 LEAF - Navigation System Owner's Manual - Manual (Page 47)

3. Enter the Li-ion battery charge start time.
Touch [% Charge] to change the amount of
charging. Touch [END Time] to change the
time to stop charging.
INFO:
. Charging timer is performed according to
the current time setting on the bottom
right of the display. When setting the
charging timer function, be sure to check
that the current time displayed is correct.
. In the default setting, [100% Charge
(Maximizes Driving Range)] is selected.
This is called long distance mode. To
extend the life span of the Li-ion battery,
use long life mode by selecting [80%
Charge (Improves Battery Longevity)].
For details, see the LEAF Owner’s
Manual.
4. To set the timer charge for different days of
the week, touch [Assign Days]. Select the
preferred timer setting for each day of the
week. When the settings are completed,
touch [OK].
5. When the settings are completed, touch
[Save Timer]. The settings confirmation
screen will be displayed.
6. If the settings shown on the screen are
correct, touch [Yes].
7. The [Timer 1] indicator illuminates after the
charging timer is set. Use the same proce-
dure to set the Timer 2 setting.
8. Place the power switch in the OFF position,
and then connect the charge connector to
the vehicle.
INFO:
. Always place the power switch in the OFF
position after setting the charging timers.
When the power switch is in the ON
position, the Li-ion battery will not start
charging.
. The Li-ion battery may not be charged to the
expected level (80% or 100%) if the
charging timer start time and end time are
set so there is not enough time to charge the
Li-ion battery.
Unique EV functions 2-9