NISSAN 2015 LEAF - Owner's Manual - Manual (Page 230)

Backing up behind a projecting object
The position
᭺
C is shown farther than the position
᭺
B in the display. However, the position
᭺
C is
actually at the same distance as the position
᭺
A .
The vehicle may hit the object when backing up to
the position
᭺
A if the object projects over the
actual backing up course.
ADJUSTING THE SCREEN
The procedure for adjusting the quality of the
screen differs depending on the type of screen
present on the vehicle.
For vehicles without Navigation System:
1. Press the ENTER/SETTING button.
2. Turn the TUNE-SCROLL knob to highlight the
“Brightness” or “Contrast” key.
3. Press the ENTER/SETTING button.
4. Adjust the level using the TUNE-SCROLL
knob and then press the ENTER/SETTING
button to apply the adjustment.
• Do not adjust the Brightness or Contrast of the
RearView Monitor while the vehicle is moving.
Display screen, heater, air conditioner, audio and phone systems 4-5