Usb connection port operation -41 – NISSAN 2015 LEAF - Owner's Manual User Manual

Page 266

Advertising
background image

USB CONNECTION PORT
OPERATION

Audio main operation:

The USB outlet connector is located in the center
console. Open the lid and connect a USB
memory as illustrated. Then, switch to the USB
memory mode automatically.

If the system has been turned off while the USB
memory was playing, pressing the PWR button
will start the USB memory.

WARNING

Do not connect, disconnect or operate

the USB device while driving. Doing so

can be a distraction. If distracted you

could lose control of your vehicle and

cause an accident or serious injury.

CAUTION

• Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port
may damage the port. Make sure that
the USB device is connected correctly
into the USB port.

• Do not grab the USB port cover (if so

equipped) when pulling the USB de-
vice out of the port. This could damage
the port and the cover.

• Do not leave the USB cable in a place

where it can be pulled unintentionally.
Pulling the cable my damage the port.

CD·AUX button:

When the CD·AUX button is pressed with the
system off and the USB memory inserted, the
system will turn on.

Next/Previous File and Fast

Forward/Rewind:

When the

or

button is pressed for

more than 1.5 seconds while a USB memory is
being played, the USB memory will play while fast
forwarding or rewinding. When the button is re-
leased, the USB memory will return to normal
play speed.

When the

or

button is pressed for

less than 1.5 seconds while the USB memory is
being played, the next track or the beginning of
the current track on the USB memory will be
played.

The multi-function controller can also be used to
select tracks when the USB memory is being
played.

Folder selection:

To change to another folder in the USB memory,
turn the folder selector.

REPEAT (RPT):

When the RPT button is pressed while the USB
memory is being played, the play pattern can be
changed as follows:

To change the play mode, press the RPT button
repeatedly and the mode will change as follows:

Display screen, heater, air conditioner, audio and phone systems

4-41

Advertising