How to use the nissan controller -3 – NISSAN 2009 Maxima - Owner's Manual User Manual

Page 156

Advertising
background image

CAUTION

The glass screen on the liquid crystal

display may break if it is hit with a hard
or sharp object. If the glass breaks, do
not touch the liquid crystalline material,
which contains a small amount of mer-
cury. In case of contact with skin, wash
immediately with soap and water.

To clean the display, never use a rough

cloth, alcohol, benzine, thinner or any
kind of solvent or paper towel with a
chemical cleaning agent. They will
scratch or deteriorate the panel.

Do not splash any liquid such as water

or car fragrance on the display. Contact
with liquid will cause the system to
malfunction.

When you use this system, make sure the engine
is running.

If you use the system with the engine not
running (ignition ON or ACC) for a long
time, it will discharge the battery, and the
engine will not start.

Reference symbols:

ENTER button — This is a button on the control
panel.

“Display” key — This is a select key on the screen.
By selecting this key, you can proceed to the next
function.

HOW TO USE THE NISSAN
CONTROLLER

Use the NISSAN controller to choose an item on
the display screen. Select an item on the display
using the main directional buttons

2

or the

center dial

3

. Then press the ENTER button

1

to select the item or perform the action.

The BACK button

4

has two functions:

● Go back to the previous display (cancel).

WHA0883

Monitor, climate, audio, phone and voice recognition systems

4-3

REVIEW COPY—

2009 Maxima (max)

Owners Manual—USA_English (nna)
10/20/08—debbie

Advertising