NISSAN 2009 Maxima - Owner's Manual User Manual

Page 304

Advertising
background image

The CVT can operate in two manual drive modes:

● M (Manual) mode - With the shift selector in

the manual shift gate Ds (Drive Sport) mode,
M (Manual) mode can be selected by mov-
ing the shift selector up (+) or down (–) or
using the shift paddles (if so equipped) up
(+) or down (–). In M mode, the transmission
will produce noticeable upshifts and down-
shifts. The position indicator in the meter
shows a “M”.

● Temporary M (Manual) shift mode - With the

shift selector in the D (Drive) mode and if the
shift paddle is moved + (up) or - (down), the
transmission will temporarily switch to the M
(Manual) mode. If the shift paddles are not
used after 5 - 10 seconds, the transmission
will return to the D (Drive) mode.

● To cancel the M (Manual) mode and return to

the D (Drive) mode, press and hold either
shift paddle for 3 - 5 seconds.

Follow these procedures for maximum vehicle
performance and driving enjoyment.

NOTE:

Engine power may be automatically re-
duced to protect the CVT if the engine
speed increases quickly when driving on
slippery roads or while being tested on
some dynamometers.

Starting the vehicle

1. After starting the engine, fully depress the

foot brake pedal before moving the shift
selector out of the P (Park) position.

2. Keep the foot brake pedal depressed and

move the shift selector into a driving gear.

3. Release the foot brake, then gradually start

the vehicle in motion.

4. Stop the vehicle completely before shifting

the shift selector to the P (Park) position.

The CVT is designed so the foot brake
pedal MUST be depressed before shifting
from P (Park) to any drive position while
the ignition switch is in the ON position.

The shift selector cannot be moved out of P
(Park) and into any of the other gear posi-
tions if the ignition switch is pushed to the
LOCK or ACC position.

To move the shift selector:

Push the button while depressing the brake
pedal

Push the button to shift

Shift without pushing button

Shifting

After starting the engine, fully depress the brake
pedal and move the shift selector from P (Park) to
any of the desired shift positions.

WSD0234

Starting and driving

5-13

REVIEW COPY—

2009 Maxima (max)

Owners Manual—USA_English (nna)
11/03/08—debbie

Advertising