Receiving a call -109 – NISSAN 2009 Maxima - Owner's Manual User Manual

Page 262

Advertising
background image

4. After the call is over, perform one of the

following to finish the call:

a. Select the “Hang up” key on the Call in

Progress screen and press the ENTER
button.

b. Press the

switch on the steering

wheel.

c. When the Call in Progress screen is dis-

played, press the PHONE button on the
instrument panel to hang up. If any other
screen is currently displayed, press the
PHONE button to display the Call in
Progress screen first, then press the
PHONE button again to hang up.

There are different methods to make a call. Select
one of the following options instead of “Call
(Phonebook)” in Step 2 above.

Redial:

Dial the previously dialed number again.

Call (Call Logs):

Select the name or phone number from the
incoming or outgoing call logs.

Call (Downloaded):

Select the name or phone number from the
downloaded call list.

Dial (Keypad):

Input the phone number manually using the
keypad displayed on the screen. For infor-
mation on how to use the touch screen, see
“How to use the touch screen” earlier in this
section.

RECEIVING A CALL

When you hear a phone ring, the display will
change to phone mode. To receive a call, follow
one of the procedures listed below.

a. Touch the “Answer” key on the display.

b. Press the PHONE button on the instrument

panel.

c. Press the phone

button on the steering

wheel switches.

LHA0987

Monitor, climate, audio, phone and voice recognition systems

4-109

REVIEW COPY—

2009 Maxima (max)

Owners Manual—USA_English (nna)
11/03/08—debbie

Advertising