NISSAN 2010 Maxima - Navigation System Owner's Manual - Manual (Page 10)

Black plate (11,1)
Model "08NJ-N" EDITED: 2010/ 5/ 14
MULTI-FUNCTION CONTROLLER
*
1 <ENTER>:
Push to select the highlighted item on the
screen.
If this button is pushed while a map is
displayed, the map menu screen is dis-
played.
*
2 Main directional buttons:
Use to move across the map, highlight an
item on the screen or adjust a setting
(volume, brightness, etc.).
*
3 Additional directional buttons:
Use to move across the map or highlight an
item on the character input screen.
*
4 Center dial:
Turn to highlight an item on the screen or
adjust a setting.
Turn the center dial on the map screen. The
map scale is displayed. Use the center dial
to adjust the map scale.
STEERING WHEEL SWITCH
*
1 <ENTER>:
Tilt to highlight an item on the screen or
adjust a setting. Push to select the high-
lighted item.
If this button is pushed while a map is
displayed, the map menu screen is dis-
played.
“MAP MENU SCREEN” (page 2-12)
Push and hold to display the start menu.
“START MENU” (page 2-7)
If this button is tilted up while the audio
function is activated and the map or status
screen is displayed, the audio system can be
operated.
*
2 <+ −>:
Use to adjust the volume. These buttons
have the same function as that of the volume
control knob. Refer to the vehicle Owner’s
Manual.
*
3 < >:
Push this button during a setting operation
to return to the previous screen. In a settings
screen, this button can also be used to apply
the setting.
*
4 <TALK >:
Push to start the voice recognition mode. If
the voice recognition mode is already
activated, pushing this button cancels the
voice guidance and you can speak a voice
command immediately.
*
5 <SOURCE>:
Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.
Getting started 2-3