NISSAN 2010 Maxima - Navigation System Owner's Manual - Manual (Page 96)

Black plate (101,1)
Model "08NJ-N" EDITED: 2010/ 5/ 14
*
5 Current waypoint:
Change or delete the waypoint.
“Editing/deleting destination or waypoint”
(page 5-16)
*
6 Condition for calculating a route to a
waypoint:
Change the conditions for calculating a
route to a waypoint.
“Changing route calculation condi-
tions” (page 5-18)
*
7 [Calculate]:
Manually search for the route again after
changing the search conditions.
“Changing route calculation condi-
tions” (page 5-18)
Setting destination or waypoint
Add a destination or waypoint to the route that is
already set. A total of 6 destinations or
waypoints can be set.
1. Push <ROUTE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>.
3. Highlight [Add Destination] or [Add Way-
point] and push <ENTER>.
If [Add Destination] is selected, the current
destination changes to a waypoint.
4. Set a destination or waypoint. The method of
searching for a destination or waypoint is the
same as the one for a destination.
“Setting destination” (page 4-1)
5. The selected location is displayed at the
center of the map. Highlight [Add to Route]
after confirming the location and push
<ENTER>.
Route guidance 5-15