Using the system -21 before starting -21 – NISSAN 2010 Maxima - Navigation System Owner's Manual User Manual
Page 190
Black plate (201,1)
Model "08NJ-N" EDITED: 2010/ 5/ 14
2. To confirm the page, scroll the screen using
the up and down switches of the main
directional buttons or the center dial.
Adapting System to Your Voice
The voice recognition system is equipped with a
learning function to adapt to the user’s voice for
better recognition. It is possible to confirm how
to operate the learning function through this
tutorial.
1. Highlight [Adapting the System to Your
Voice] and push <ENTER>. The tutorial
starts.
2. The voice guide demonstrates the steps that
have to be performed.
3. When the tutorial is completed, the system
automatically switches to the Menu screen.
USING THE SYSTEM
Initialization
When the ignition switch is pushed to the ON
position, Voice Recognition is initialized, which
may take up to one minute. When completed,
the system is ready to accept voice commands.
If <TALK
> is pushed before the initializa-
tion completes, the display will show the
message: “System not ready”.
BEFORE STARTING
To get the best recognition performance out of
Voice Recognition, observe the following:
. The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.), which may prevent
the system from correctly recognizing the
voice commands.
. Wait until the tone sounds before speaking a
command.
. Speak in a natural conversational voice
without pausing between words.
. If the air conditioner is set to “Auto”, the fan
speed is automatically lowered so that voice
commands can be recognized more easily.
. The voice recognition system cannot be
operated when the soft top is not closed (for
370Z Roadster only).
Voice recognition
9-21