NISSAN 2015 Murano - Navigation System Owner's Manual - Manual (Page 155)

Operating tips
. Speak a command after the tone.
. If the command is not recognized, the system
will prompt you to speak the command again.
Repeat the command in a clear voice.
. Touch [ ] on the touch screen or push
< > on the steering wheel to return to the
previous screen.
. To exit the Voice Recognition system, push
and hold < > on the steering wheel.
. To adjust the volume of the system feedback,
push < - >/< + > on the steering
wheel or turn the <VOL/ > while the
system is making an announcement.
The volume setting is also available from
[Guidance Volume] in the [Settings] menu on
the Launch Bar.
“Volume and Beeps settings”
(page 2-15)
. When setting a destination for route gui-
dance with some search methods, such as
POI, Intersection or City Center search, the
search area is automatically set to the state
where your vehicle is located. Change state/
province to change the search area to
another state/province if necessary.
Voice Prompt Interrupt:
In most cases, you can interrupt the voice
feedback to speak the next command by pushing
the <
> on the steering wheel. After inter-
rupting the system, wait for a tone before
speaking your command.
One Shot Call:
To use the system faster when making a call, you
may speak the second level command skipping
speaking the first level command. For example,
push <
> and say “Redial” after the tone
without first saying “Phone”.
How to see voice command screen
1. Push < > to display the first screen of the
voice command list.
2. Speak a command or select an item on the
voice command list. The Second screen is
displayed.
3. Speak a command or select an item on the
voice command list. The command is exe-
cuted or the next screen for further command
is displayed.
4. Follow the prompts to complete the com-
mands.
Voice command screens:
First screen
*
1 Shows a list of available categories. Speak a
category command or touch the key of the
corresponding category.
*
2 Shows a list of available commands for the
selected category. Speak a preferred com-
mand.
*
3 Touch [HELP] or say “Help” to hear help
announcements on how to use the system.
7. Voice recognition
7-3