NISSAN 2015 Murano - Navigation System Owner's Manual - Manual (Page 43)

The radio screen can be viewed and operated on
the touch screen display.
*
1 [AM Menu]/[FM Menu]/[SXM Menu]:
Touch to display the radio menu screen.
“Radio Menu” (page 3-14)
*
2 [Source]:
Touch to display the audio source screen to
select the other audio source.
“Selecting audio source” (page 3-11)
*
3 Preset number:
A preset number is displayed if the current
frequency is stored as a preset station/
channel.
*
4 Audio source indicator:
Indicates the currently selected audio
source.
*
5 Reception information display:
Reception information available at the time
such as frequency, station/channel name,
etc. are displayed.
*
6 Turn direction indicator:
When a route to the destination is set,
turning direction and the distance to the
next turn is displayed.
*
7 TAG indicator (for U.S.):
TAG indicator is displayed if the iTunes Š
Tagging information exists in the HD broad-
cast receiving.
“Radio Menu” (page 3-14)
*
8 Preset list:
To listen to a preset station, touch the
corresponding key in the preset list. Touch [
< ] or [ > ] to scroll the preset list. Touch and
hold one of the keys in the preset list to store
the station/channel currently tuned to.
“Presetting” (page 3-14)
*
9 Mode indicator (for U.S.):
HD Radio icon will appear when HD mode
setting is turned on.
“Radio Menu” (page 3-14)
“Live” will appear when in ballgame mode
during reception of the HD broadcast.
INFO:
HD Radio (for U.S.) reception needs to be
activated to receive HD Radio broadcasts. This
enables you to receive radio broadcasts digitally
(where available), providing a better quality
sound with clear reception. When this feature
is not activated or HD Radio broadcasts are not
available, you will receive analog radio (AM/FM)
broadcasts.
“Radio Menu” (page 3-14)
Radio operation
Radio activation and band selection:
To listen to the radio, turn on the audio system
and select a preferred radio band on the audio
source menu screen.
“Selecting audio source” (page 3-11)
INFO:
When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.
Seeking stations/channels:
Tilt and hold < >/< > on the steering
wheel to seek up/down to the next receivable
broadcast station/channel.
To tune to stations/channels manually, turn
<TUNE·SCROLL/SOUND> until the preferred
station is selected.
Scan tuning:
To scan tune the stations/channels, touch [FM
Menu], [AM Menu] or [SXM Menu] on the radio
screen and then touch [Scan]. The stations/
channels will be tuned from low to high
3. Audio system
3-13