NISSAN 2013 Pathfinder - Owner's Manual - Manual (Page 37)

Folding the 2nd row bench seat
To fold the 2nd row bench seat flat for maximum
cargo hauling:
1. Make sure that the head restraints are low-
ered. For maximum cargo hauling, remove
the center head rest. To remove the head
rest, push and hold the lock knob while
moving the head rest in an upward direction.
Store the head rest properly so it is not loose
in the vehicle.
2. Stow the 2nd row seat belts in the seat belt
hooks found on the sides of the vehicle.
3. Lift up on the recline lever on the side of the
outboard seats to fold the seatbacks flat.
4. To return the 2nd row bench seats to a
seating position, push up on the seatback
until it latches in place.
Folding the 3rd row seats
To fold the 3rd row seats flat for maximum cargo
capacity:
1. Pull the strap
᭺
1 to release the head re-
straint forward.
2. Stow the 3rd row seat belts in the seat belt
hooks
᭺
4 found on the sides of the cargo
area.
3. Pull up on the latch
᭺
2 located in the upper
corner of each seatback and lower the seat-
back forward over the seat base.
LRS2144 LRS2145
1-20 Safety—Seats, seat belts and supplemental restraint system