NISSAN 2013 Pathfinder - Owner's Manual User Manual

Page 61

Advertising
background image

9. Check to make sure the child restraint is

properly secured prior to each use. If the
seat belt is not locked, repeat steps 2
through 8.

10. If the child restraint is installed in the front

passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light

should illuminate. If this

light is not illuminated see “Front passenger
air bag and status light” in this section.
Move the child restraint to another
seating

position.

Have

the

system

checked by a NISSAN dealer.

After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.

1. Top tether strap

2. Anchor point

INSTALLING TOP TETHER STRAP
(2nd row bench seat)

First, secure the child restraint with the LATCH
lower anchors (2nd row bench outboard seating
positions only) or the seat belt, as applicable.

1. OUTBOARD SEATING POSITIONS

If necessary, raise or remove the head re-
straint to position the top tether strap

1

over the top of the seatback. If the head

Forward-facing – step 10

LRS0865

2nd row bench seat

LRS2138

1-44

Safety—Seats, seat belts and supplemental restraint system

Advertising