How to switch the display -35 – NISSAN 2015 Pathfinder - Owner's Manual User Manual
Page 232
Backing up behind a projecting object
The position
᭺
C
is shown farther than the position
᭺
B
in the display. However, the position
᭺
C
is
actually at the same distance as the position
᭺
A
.
The vehicle may hit the object when backing up to
the position
᭺
A
if the object projects over the
actual backing up course.
HOW TO SWITCH THE DISPLAY
With the ignition switch in the ON position, press
the CAMERA button or move the shift lever to the
R (Reverse) position to operate the Around View
Monitor.
The Around View® Monitor can display two split
view as well as a single view of the front-wide
view or rear-wide view. Select the “Change View”
key to switch between the available views.
If the shift lever is not in the R (Reverse) position,
the available views are:
● Front-view/bird’s-eye view split screen
● Front-view/front-side view split screen
● Front-wide view
If the shift lever is in the R (Reverse) position, the
available views are:
● Rearview/bird’s-eye view split screen
● Rearview/front-side view split screen
● Rear-wide view
The display will switch from the Around View
Monitor screen when:
● When the shift lever is in the D (Drive) posi-
tion and the vehicle speed increases above
approximately 6 mph (10 km/h).
● When a different screen is selected.
LHA3147
Monitor, climate, audio, phone and voice recognition systems
4-35