Hill descent control system (if so equipped) -46 – NISSAN 2015 Pathfinder - Owner's Manual User Manual

Page 405

Advertising
background image

When driving on an unstable surface

such as a turntable, ferry, elevator or
ramp, the VDC warning light may illumi-
nate. This is not a malfunction. Restart
the engine after driving onto a stable
surface.

If wheels or tires other than the NISSAN

recommended ones are used, the VDC
system may not operate properly and
the VDC warning light may illuminate.

The VDC system is not a substitute for

winter tires or tire chains on a snow
covered road.

WARNING

Never rely solely on the hill descent

control system to control vehicle speed
when driving on steep downhill grades.
Always drive carefully and attentively
when using the hill descent control sys-
tem and decelerate the vehicle speed by
depressing the brake pedal if neces-
sary. Be especially careful when driving
on frozen, muddy or extremely steep
downhill roads. Failure to control ve-
hicle speed may result in a loss of con-
trol of the vehicle and possible serious
injury or death.

The hill descent control may not control

the vehicle speed on a hill under all load
or road conditions. Always be prepared
to depress the brake pedal to control
vehicle speed. Failure to do so may re-
sult in a collision or serious personal
injury.

The hill descent control system can only be acti-
vated when the 4WD LOCK switch is engaged.

The hill descent control system helps maintain
vehicle speed when driving under 15 MPH
(25 km/h) on steeper downhill grades. Hill de-
scent control is useful when engine braking alone
cannot control vehicle speed. Hill descent con-
trol applies the vehicle brakes to control vehicle
speed allowing the driver to concentrate on
steering while reducing the burden of brake and
accelerator operation.

If the hill descent control light is blinking, the hill
descent control is engaged; however, the hill
descent control will not control the vehicle
speed.

● When additional braking is required on

steep downhill roads, activate the hill de-
scent control system by pushing the switch
ON. For additional information, refer to “Hill
descent control switch” in the “Instruments
and controls” section of this manual.

● Once the system is activated, the indicator

light will remain on in the instrument panel.
For additional information, refer to “Hill de-
scent control system on indicator light” in the
“Instruments and controls” section of this
manual.

HILL DESCENT CONTROL SYSTEM (if
so equipped)

5-46

Starting and driving

Advertising