NISSAN 2012 Quest - Quick Reference Guide - Manual (Page 10)

first drive features
8
OuTSIDe MIrrOr cONTrOL SwITch
To select the right or left side mirror, turn the control
switch
01
right or left.
To adjust the mirror angle, move the control switch
01
up, down, right or left.
To prevent accidentally moving the mirror, turn and
set the switch to the middle “neutral” position.
ReVeRSe TiLT-dOWn feATuRe (if so equipped)
When backing up the vehicle, the right or left outside mirror can be selected to automatically
turn downward to provide better rear visibility.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the r (reVerSe) position.
3. choose the right or left outside mirror by operating the outside mirror control switch 01
.
4. The outside mirror surfaces move downward.
When one of the following conditions has occurred, the outside mirror surfaces will return to
their original positions.
• The shift lever is moved to any position other than r (reVerSe).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is pushed to the OFF position.
for more information, refer to the “pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
FOLDING The 2 ND rOw SeaTS
Secure the seat belts on the seat
belt hooks
01
on the side wall.
To fold down the seatbacks, pull the lever 02
on the
2nd row seat.
To return the seatbacks, lift up each seatback and
push it to the upright position until it is latched.
for more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01
02