NISSAN 2012 Quest - Quick Reference Guide - Manual (Page 18)

16
system guide
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
Speak in a clear and natural voice without pausing between words.
Look straight ahead and avoid speaking too loudly or too softly.
To go back to the previous command, say “Go back”.
To cancel a voice recognition session, say “exit” or press and hold the or
button.
To interrupt the system voice and give a command quickly, press the or button.
When speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. for example, “Michael Smith” may be spoken as “Smith Michael”.
To increase or decrease the volume of the voice prompts, push the volume control switches
or
+
on the steering wheel or turn the VOL/ON•OFF control knob on the audio system
while the system is responding.
if the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
Bluetooth ® System with Navigation (if so equipped)
cOnnecTinG PROceduRe
nOTe: The vehicle must be stationary when connecting
the phone.
1. Press the button on the steering wheel and select
the “connect Phone” key.
2. initiate connecting from the phone.
• The connecting procedure varies according to each
cellular phone model. for detailed connecting
instructions and a list of compatible phones,
please visit www.nissanusa.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The Pin code is assigned
by niSSAn and cannot be changed.)
3. When the connecting is complete, the screen will
return to the Phone menu display.