NISSAN 2012 Quest - Quick Reference Guide - Manual (Page 17)

TrIp cOMpuTer
When the button 01 is pressed, the following
modes will appear on the dot matrix liquid crystal
display
02 :
MpG/aVG – displays the current and average fuel
consumption.
MpG/Mph – displays the average fuel consumption
and speed since the last reset.
TIMe/miles – displays the elapsed time and total
distance the vehicle has been driven since the last reset.
raNGe – displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
OuTSIDe TeMp – displays the exterior air
temperature including a low temperature
warning feature.
SeTTING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
– Press the button 03 to cycle through the various setting modes.
– Press the button 01 to choose the selected menu.
warNING – if there are any.
for more information, refer to the “pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
02
03
BLueTOOTh ® haNDS-Free phONe SYSTeM (if so equipped)
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTeM OPeRATinG TiPS
close all windows. Surrounding noises may interfere
with system operation and performance.
Press the or
button on the steering wheel to
activate voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the tone.
Microphone
Bluetooth ® controls
*Some jurisdictions prohibit the use of cellular telephones while driving.
15
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
system guide