NISSAN 2015 Quest - Quick Reference Guide - Manual (Page 14)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 12
3
RD ROW SEAT ADJUSTMENTS
To adjust the angle of the seatback, pull the strap
on the seatback 1
and lean back. Release the
strap at the desired angle.
For more information, refer to the “Safety — Seats, seat belts
and supplemental restraint system (section 1)” of your
Owner’s Manual.
1
FIRST DRIVE FEATURES
AUTOMATIC DRIVE POSITIONER
(if so equipped)
Two positions for the driver’s seat and outside
mirrors can be stored in the automatic drive
positioner memory.
Follow this procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat and outside mirrors to the desired positions using the
adjusting switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• The driver’s seat and outside mirror positions are now set to your preferences.
These memorized positions can also be linked to your NISSAN Intelligent Key ® . To link
a memorized position to your NISSAN Intelligent Key, press the unlock button on the
key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1705378_15a_Quest_QRG_082514.indd 12 8/25/14 11:57 AM