NISSAN 2015 Quest - Quick Reference Guide - Manual (Page 23)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 21
TRIP COMPUTER
When the button 1 is pressed, the
following modes will appear on the vehicle
information display
2 :
• MPG/AVG – Displays the current and average
fuel consumption.
• MPG/MPH – Displays the average fuel
consumption and speed since the last reset.
• TIME/miles – Displays the elapsed time and
total distance the vehicle has been driven since
the last reset.
• RANGE – Displays the estimated distance to empty (dte) the vehicle can be driven
before refueling.
• OUTSIDE TEMP – Displays the exterior air temperature, including a low temperature
warning feature.
• SETTING – Allows you to set reminders for alerts and maintenance intervals or
change the language and units used in the system.
- Press the button 3 to cycle through the various setting modes.
- Press the button 1 to choose the selected menu.
• WARNING – Displays when a warning is present.
To reset Trip A and Trip B, go to the desired mode on the trip computer and hold the
TRIP RESET button 4
for more than 1 second.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
2
3
BLUETOOTH ® HANDS-FREE PHONE SYSTEM (if so equipped)
A cellular telephone should not be used
while driving so full attention may be given to
vehicle operation.*
SYSTEM OPERATING TIPS
Press the or
button to interrupt the voice
prompts at any time and speak a command after
the tone.
For vehicles not equipped with Navigation:
• To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, press
the or
button and after the tone, say
“Call Redial”.
Microphone
Bluetooth ®
Controls
*Some jurisdictions prohibit the use of cellular telephones while driving.
SYSTEM GUIDE
4
1705378_15a_Quest_QRG_082514.indd 21 8/25/14 11:57 AM