New system features, Blind spot warning (bsw) system (if so equipped), Advanced climate control system (if so equipped) – NISSAN 2015 Quest - Quick Reference Guide User Manual

Page 6

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

4

NEW SYSTEM FEATURES

BLIND SPOT WARNING (BSW) SYSTEM (if so equipped)

The control switch

1

is located on the left side

of the instrument panel.

The system automatically turns on when the

engine is started and the BSW ON indicator light

on the switch illuminates.

The indicator light

2

, located in the outside

mirror, will activate when the BSW system detects
a vehicle in the detection zone.

If a turn signal is activated in the direction of a

detected vehicle, a chime sounds twice and the
BSW indicator light will flash.

To cancel the system, push the control switch

and the BSW ON indicator light will extinguish.

For more information, refer to the “Starting and driving (section 5)”
of your Owner’s Manual.

1

2

ADVANCED CLIMATE CONTROL SYSTEM (if so equipped)

The advanced climate control system keeps the air inside the vehicle clean, using ion
control and automatic air intake control with an exhaust gas detecting sensor.

When ion control is activated, this unit generates highly concentrated Plasmacluster

®

ions into the air blown from the vents, reducing the odor absorbed inside the vehicle.

When the automatic air intake control is activated, the exhaust gas detection sensor
can detect odors, such as pulp or chemicals, and exhaust gas, such as gasoline or
diesel. When such odors or gases are detected, the system automatically changes
from the outside air circulation mode to the recirculation mode.

For more information, refer to the “Monitor, heater, air conditioner, audio, phone and voice recognition systems
(section 4)”
of your Owner’s Manual.

1705378_15a_Quest_QRG_082514.indd 4

8/25/14 11:57 AM

Advertising