Essential information, Outside temperature display, Divide-n-hide – NISSAN 2014 Rogue - Quick Reference Guide User Manual

Page 10: Floor (if so equipped)

Advertising
background image

8

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

ESSENTIAL INFORMATION

OUTSIDE TEMPERATURE DISPLAY

When the ignition switch is in the ON position, the

outside air temperature will appear in the vehicle
information display

01

.

If the outside air temperature is below 25°F (-4°C),

the outside temperature display will blink for 20
seconds then remain on when the ignition is
switched on.

If the outside air temperature is between 27°F and

37°F (-3°C and +3°C), the outside temperature display will blink continuously with the
ignition switch in the ON position.

To stop the outside temperature display from blinking, stop the vehicle in a safe place and

move the shift lever to the (P) PARK position. Perform the following procedure:

1. Press the

button on the steering wheel until the Settings mode is displayed.

2. Move the button on the steering wheel until it reaches the Alarm mode then press

ENTER to select.

3. Move the button until it reaches the Outside temp mode then press ENTER to select.

4. Move the button until it reaches the Off mode then press ENTER to select.

5. To exit, press the

button on the steering wheel again.

LOW OUTSIDE TEMPERATURE WARNING
The Low outside temperature warning message

02

will appear in the vehicle information

display

01

when the outside temperature drops below 37°F (+3°C) with the ignition switch

in the ON position.

For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.

01

02

DIVIDE-N-HIDE

®

FLOOR (if so equipped)

Do not place more than 30 lbs (13.6 kg) on the

adjustable floor when it is in the upper position.
Do not place more than 165 lbs (75 kg) on the
adjustable floor when it is in the mid position.

There are multiple positions for the adjustable floor.

The upper position allows for additional storage
below the adjustable floor

01

.

To move the adjustable floor from the lower position

02

to the upper position:
1. Use the handle to lift the adjustable floor.
2. Move the adjustable floor to the upper guide track

and ensure it is secure in place.

For more information, refer to the “Starting and driving (section 5)”
of your Owner’s Manual.

01

02

1766904_14d_Rogue_QRG_062514.indd 8

6/25/14 3:29 PM

Advertising