Power liftgate (if so equipped), Front seat adjustments – NISSAN 2014 Rogue - Quick Reference Guide User Manual

Page 13

Advertising
background image

11

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

POWER LIFTGATE (if so equipped)

When the liftgate is closed and locked, the liftgate will

open automatically by:

• Pushing the power liftgate switch

01

on the

instrument panel.

• Pushing the liftgate opener switch

02

. The

liftgate must be unlocked, or you must have the
Intelligent Key with you (in your pocket or purse).

• Pressing the

button

03

on the NISSAN

Intelligent Key

®

for more than 1 second.

The power liftgate operation can be turned on or

off by the power liftgate on/off switch

04

on the

instrument panel.

• When the power liftgate on/off switch

04

is

pushed to the OFF position, power operation is not
available using the power liftgate switch

05

on the

liftgate or the liftgate opener switch

02

.

LIFTGATE POSITION SETTING (if so equipped)
The liftgate can be set to open to a specific height by performing the following:
1. Open the liftgate using the request switch or the Intelligent Key.
2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some

resistance when being manually adjusted).

3. While holding the liftgate in position, press and hold the power liftgate switch

05

located

on the liftgate for approximately 5 seconds or until 3 beeps are heard.

The liftgate will open to the selected position setting. To change the position of the liftgate,

repeat steps 1-3 for setting the position of the liftgate.

For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

03

04

01

02

05

FRONT SEAT ADJUSTMENTS

To slide the seat forward or backward, push the control switch

01

forward or backward.

To recline the seatback, push the switch

02

forward or backward.

SEAT LIFTER
To raise or lower the front portion or height of the

seat, push the front or back end of the switch

01

up or down.

POWER LUMBAR SUPPORT
(if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch

03

.

For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.

01

02

03

1766904_14d_Rogue_QRG_062514.indd 11

6/25/14 3:29 PM

Advertising