Outside temperature display, Divide-n-hide, Floor (if so equipped) – NISSAN 2015 Rogue - Quick Reference Guide User Manual

Page 11

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

9

OUTSIDE TEMPERATURE DISPLAY

When the ignition switch is in the ON position, the

outside air temperature will appear in the vehicle
information display

1

.

If the outside air temperature is below 25°F

(-4°C), the outside temperature display will blink
for 20 seconds then remain on when the ignition
is switched on.

If the outside air temperature is between 27°F and

37°F (-3°C and +3°C), the outside temperature display will blink continuously with the
ignition switch in the ON position.

To stop the outside temperature display from blinking, stop the vehicle in a safe place

and move the shift lever to the (P) PARK position. Perform the following procedure:

1. Press the

button on the steering wheel until the Settings mode is displayed.

2. Move the button on the steering wheel until it reaches the Alarm mode then press

ENTER to select.

3. Move the button until it reaches the Outside temp mode then press ENTER

to select.

4. Move the button until it reaches the Off mode then press ENTER to select.

5. To exit, press the

button on the steering wheel again.

LOW OUTSIDE TEMPERATURE WARNING
The Low outside temperature warning message

2

will appear in the vehicle

information display

1

when the outside temperature drops below 37°F (+3°C) with

the ignition switch in the ON position.

For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.

1

2

DIVIDE-N-HIDE

®

FLOOR

(if so equipped)

Do not place more than 30 lbs (13.6 kg) on the

adjustable floor when it is in the upper position.
Do not place more than 165 lbs (75 kg) on the
adjustable floor when it is in the middle position.

There are multiple positions for the adjustable

floor. The upper position allows for additional
storage below the adjustable floor

1

.

To move the adjustable floor from the lower position

2

to the upper position:

1. Use the handle to lift the adjustable floor.
2. Move the adjustable floor to the upper guide

track and make sure it is securely in place.

For more information, refer to the “Starting and driving (section 5)”
of your Owner’s Manual.

1

2

1758972_15b_Rogue_QRG_082614.indd 9

8/26/14 1:07 PM

Advertising