First drive features, Cruise control – NISSAN 2015 Rogue - Quick Reference Guide User Manual

Page 20

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

18

CRUISE CONTROL

The cruise control system enables you to set a

constant cruising speed once the vehicle has
reached 25 MPH (40 km/h). The system will
automatically maintain the set speed until you tap
the brake pedal, accelerate, cancel or turn the
system off.

To activate the cruise control, push the ON•OFF

switch

1

. The CRUISE indicator light in the

instrument panel will illuminate.

To set a cruising speed, accelerate the vehicle to the desired speed, push the

COAST/SET switch

2

and release. A green circle indicator light in the instrument

panel will illuminate, and the set speed will display next to the indicator light. Take your
foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch

3

.

When the vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch

2

.

Release the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch

4

.

To turn off cruise control, push the ON•OFF switch

1

. Both the CRUISE indicator

light and green circle indicator light in the instrument panel will extinguish.

For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

3

2

1

4

4

STATION SELECT KEYS

Twelve stations can be set for the FM band, 6 for the AM band and 18 for

satellite radio.

To store a station in a preset, you must first select a radio band by pressing the

FM•AM button

5

or SXM button

6

then tune to the desired FM, AM or

satellite radio station.

Then press and hold the desired station select button (1-6) until a beep is heard and

the sound is briefly muted. The channel indicator will appear on the display and the
sound will resume. Programing is now complete.

To retrieve a previously set station, select the radio band where the preset was stored

then press the corresponding station select button (1-6).

For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of
your Owner’s Manual.

FIRST DRIVE FEATURES

1758972_15b_Rogue_QRG_082614.indd 18

8/26/14 1:07 PM

Advertising