NISSAN 2014 Rogue Select - Owner's Manual - Manual (Page 127)

Black plate (125,1)
[ Edit: 2013/ 10/ 22 Model: S35-D ]
WARNING
. Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the
hood to fly open and result in an
accident.
. If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.
SPA2412
When opening the hood:
1. Pull the hood release handle *
1 located
below the instrument panel; the hood will
then spring up slightly.
2. Pull the lever *
2 up at the front of the hood
with your fingertips.
3. Raise the hood.
4. Remove the support rod from the hood and
insert it into the slot *
3 .
Hold the coated part *
A when removing or
resetting the support rod. Avoid direct
contact with the metal parts, as they may
be hot immediately after the engine has
been stopped.
When closing the hood:
1. While supporting the hood, retune the
support rod to its original position.
2. Slowly lower the hood to about 8 to 12 in
(20 to 30cm) above the hood lock, then let it
drop.
3. Make sure it is securely latched.
Pre-driving checks and adjustments 3-9
HOOD
Condition: