NISSAN 2014 Rogue Select - Owner's Manual - Manual (Page 258)

Black plate (256,1)
[ Edit: 2013/ 10/ 22 Model: S35-D ]
8-14 Maintenance and do-it-yourself
SDI1480C
1. Remove the cell plugs *
A .
2. Add distilled water up to the UPPER LEVEL
*
1 line.
If the side of the battery is not clear, check
the distilled water level by looking directly
above the cell; the condition
*
1 indicates
OK and the conditions *
2 needs more to
be added.
3. Tighten cell plugs *
A .
Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.
JUMP STARTING
If jump starting is necessary, see “Jump starting”
(P.6-9). If the engine does not start by jump
starting, the battery may have to be replaced.
Contact a NISSAN dealer.
SDI2090
1. Alternator
2. Water pump
3. Drive belt auto-tensioner
4. Crankshaft pulley
5. Air conditioner compressor
WARNING
Be sure the ignition switch is in the OFF
or LOCK position before servicing drive
belts. The engine could rotate unex-
pectedly.
1. Visually inspect each belt for signs of
unusual wear, cuts, fraying or looseness. If
DRIVE BELTS
Condition: