System operation -28 – NISSAN 2013 Titan - Owner's Manual User Manual

Page 171

Advertising
background image

SYSTEM OPERATION

The automatic drive positioner system will not
work or will stop operating under the following
conditions:

● When the vehicle speed is above 4 MPH (7

km/h).

● When any of the memory switches are

pushed while the automatic drive positioner
is operating.

● When the adjusting switch for the driver’s

seat is turned on while the automatic drive
positioner is operating.

● When the seat has already been moved to

the memorized position.

● When no seat position is stored in the

memory switch.

● When the shift selector is moved from P

(Park) to any other position.

● When the driver’s door remains open more

than 45 seconds and the ignition switch is
not in the ON position.

The automatic drive positioner system can be
adjusted and canceled. For vehicles with a navi-
gation system, see “Vehicle electronic systems”
in the “Display screen, heater, air conditioner,
audio and phone systems” section of this manual.
For vehicles without navigation system, see your
NISSAN dealer.

3-28

Pre-driving checks and adjustments

Advertising